exemplified screen of measurement result, please refer to 3.3 Data Management.
In measurement of 1.2V Ni-cd batteries, currently you could only set average as reference.
3.2.3 Test of Oscilloscope
This function could have a simple test for battery voltage. Select “Oscilloscope” in main menu and
you will see the screen as below (see Fig 3.2.3):
Fig. 3.2.3
“1V” indicates the voltage scale on the vertical axle.
“100uS” indicates time on the horizontal axle.
Both numbers are changeable for different view.
3.3 Data Management
Testing data for single cell and battery string are saved in main unit memory as tests are finished.
Maximally the Internal memory could save testing data for 3000 cells. Before space is full, please
transfer the data timely to PC by using the USB drive and USB converter.
For management, click “Data” in the main menu, and then go to the following screen:
Fig. 3.3.1 Fig. 3.3.2 Fig. 3.3.3 cell result
Select the displaying for single cell or string on the top of the screen.
Testing data like name, testing time and size will be displayed. Other buttons have functions as below:
Open: Click this button to view the testing result as Fig. 3.3.2 and Fig 3.3.3.
Up / down: paging up or down.
Save: Select relevant item and click this button to save the testing result in the USB drive. Before this
To Next Page
Loading...