53/124
EN
53 /6 0
This manual belongs to PIUSI S.p.A. The reproduction of all or parts is prohibited.
CUBE
EN (translated from Italian)
4 When are dispensings made
via iButton or smartphones
without an internet connection
uploaded to the cloud?
There are 4 cases in which the dispensings are uploaded to
the cloud:
• Each time the APP is opened, if the data connection is
active
• APP open in the background and data connection active
• Data synchronization by the manager by pressing the
SYNCHRONIZATION key
• Every time a driver connects to the controller and the
internet connection of the smartphone is active
As you can see from the list, the dispensings can be uploaded
to the cloud even if your smartphone is not connected to the
controller.
5 What if I can’t dispense via
authentication with iButton?
There are a few possible cases:
• Dispensing memory full
• Tank empty
• iButton not associated with any driver
In detail:
Dispensing memory full and tank empty
• NOT FOR RESALE • NICHT EICHFÄHIG • PARA UTILISACION EXCLUSIVA DEL USUARIO •
INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO
NON IDONEO ALLA MISURAZIONE DI PRODOTTI PER LA VENDITA AL PUBBLICO • NE È
VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •
MADE in ITALY
0.00
The red LED to the right of the controller display is on. This
may indicate problems in the memory (dispensing memory full)
or tank empty.
To empty the dispensing memory, synchronize with the cloud. If
the problem is not solved, reset the controller
iButton not associated with any driver
• NOT FOR RESALE • NICHT EICHFÄHIG • PARA UTILISACION EXCLUSIVA DEL USUARIO •
INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO
NON IDONEO ALLA MISURAZIONE DI PRODOTTI PER LA VENDITA AL PUBBLICO • NE È
VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •
MADE in ITALY
0.00
When the iButton is placed on the reader the display does not
light up
To Next Page
Loading...
