www.pivotcycles.com 1.877.857.4868
Battery LED Warning Codes
• System errors and warnings can be indicated by various lighting patterns on the battery's power panel.
• If any issues persist after the suggestions below, contact the place of purchase.
ERROR TYPE ISSUE LIGHTING PATTERN* REMEDY
SYSTEM
ERROR
Communication error with
the bicycle system
Make sure the battery cable is not
loose or improperly connected.
TEMPERATURE
PROTECTION
If the temperature exceeds
the guaranteed operating
range, the battery output is
shut o
Leave the battery in a cool place
away from direct sunlight until the
internal temperature of the battery
decreses suciently.
SECURITY
AUTHENTICATION
ERROR
This is diplayed if a genuine
drive unit is not connected
or if any of the cables are
disconnected
Connect a genuine battery and
drive unit. Check the condition of
the cables.
CHARGING
ERROR
This is displayed if there is an
error during charging
Remove the charger from the bat-
tery and press the power button. If
an error appears, contact the place
of purchase.
BATTERY
MALFUNCTION
Electrical failure inside the
battery
Connect the charger to the bat-
tery and then remove the charger.
Press the power button with only
the battery connected.
: No Light : Lit Up : Blinking
*
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
