www.pivotcycles.com 1.877.857.4868
Update Firmware Menu in E-Tube Project
• There is a button in the main menu to update the rmware.
• By pressing the "Update Firmware" button, the software automatically searches for and downloads any
update for the system.
• Once the program has completed any updates, each component of the Shimano STEPS E8000 System will
be listed with the corresponding version of the latest rmware for that component.
SHIMANO STEPS E8000 SYSTEM
Preset Menu in E-Tube Project
• The E-Tube Project allows saving and loading custom settings les.
• Any customized setting can be saved as a preset settings le.
• Settings les can also be pulled from a bike and saved as a preset settings le. The saved settings can be
uploaded to other bikes to duplicate the settings on other bikes.
• To create a preset settings le on the app:
1. Make any changes to the settings of the bike in the Customize menu.
2. Upload the changes to the bike.
3. Open the Preset menu and click on, "Loading settings from the bike".
4. Click on the "Connected" button on the bottom of the screen.
5. The settings that were just uploaded will now appear listed on the screen. By scrolling to the bottom
of the screen, the le name can be edited.
6. Click on the download button on the bottom of the screen. A conrmation of the successful download
will appear.
7. Now, the saved a preset settings le will appear under the "Load a settings le" option within the
Preset menu.
Customize Menu in E-Tube Project
• The Customize menu is sub-divided into menus for individual units: Drive Unit, Display Unit, Switch Setting,
and Multi Shift Setting
• The tables below show the available options within the Customize menu.
DRIVE UNIT SETTING DESCRIPTION
Light Sets whether to use a light.
DISPLAY UNIT SETTING DESCRIPTION
Display Units Switches the measurement units between km and mile.
Display Switchover Sets whether to display traveling time, average speed, maximum speed, cadence, and current time.
Time Setting Sets the correct current time.
Beep Setting Switches the beep sound on or o.
Brightness Adjusts the backlight's brightness.
Dislay Language Sets the language used between English, French, German, Dutch, Spanish, and Italian.
SWITCH SETTING DESCRIPTION
Shifting Switch Sets the shift direction of buttons X2 and Y2 on the Shifting Switch (C)
MULTI SHIFT SETTING DESCRIPTION
Multi Shift Switches the multi shift function on or o.
Gear-shifting Interval Adjusts the shifting speed of multi shift mode. Does not aect shifting speed of individual shifts.
Gear Number Limit Sets how many gears the derailleur will shift through in multi shift mode.
To Next Page
Loading...
Need help?
General
