www.pivotcycles.com 1.877.857.4868
Table of Contents
Performance. Redened.
SECTION PAGE
1. Quick Start Guide 1
- Bike Set-up 1
- Charging the Battery 1
- Powering the System ON and OFF 1
- Assist Mode Operation
1
2. Basic Operation 2
- Assist and Shifter Switch Function 2
- Operating the Cycle Computer 2
- Screen Display 2
3. Bike Set-up 3
- Setting Proper Sag 3
- Setting Compression Damping on the Fox DPX2 3
- Setting Open Mode Adjust on the Fox DPX2 3
- Setting Rebound Damping on the Fox DPX2 4
- Setting Air Pressure on the Fox 36 Fork 4
- Setting Compression Damping on the Fox 36 Fork 5
- Setting Rebound Damping on the Fox 36 Fork 5
- Recommended Tire Pressure 5
- Adjusting Saddle Height 5
4. Shimano STEPS E8000 System 6
- Connecting to E-Tube Project 6
- Main Menu for E-Tube Project 6
- Customize Menu in E-Tube Project 7
- Update Firmware Menu in E-Tube Project 7
- Preset Menu in E-Tube Project 7
- Battery Charging Notes 8
- Charger LED Lamp 8
- Battery Power Panel LED Lamps 8
- Removing the Battery 9
- Installing the Battery 9
5. Troubleshooting 10
- Cycle Computer Warning Codes 10
- Cycle Computer Error Codes 10
- Battery LED Warning Codes 11
6. Schematics 12
- Shimano STEPS E8000 Schematic 12
- Small Parts Schematic 13
- Small Parts Table 14
- Wiring Diagram 15
7. Reference Material 16
- Shimano STEPS E8000 System 16
- Pivot Shuttle 16