Pixsys ATR144 - GROUP H - SFE.5 - Soft-start and mini cycle

68 - ATR144 - User manual
12.h GROUP H -
sft.s
- Soft-start and mini
cycle
108 de.st. Delayed Start
To set the initial waiting time for the delayed start of the
setting or cycle, even in case of a blackout. The elapsed
time is saved every 10 minutes.
0 Initial waiting time disabled: the
controller starts immediately (Default)
00:01-24:00 hh.mm Initial
waiting time enabled.
109 Pr. cY . Pre-programmed Cycle
Enables special functionings.
diS a b. Disabled (Default)
En a b. Enabled (all remote sepoint
functions are inhibited)
110 SS.TY. Soft-Start Type
Enables and selects the soft-start type
diS a b. Disabled (Default)
Grad. Gradient
P erc. Percentage (with only pre-
programmed cycle disabled)
111 SS. G r. Soft-Start Gradient
Rising/falling gradient for soft-start and pre-program-
med cycle.
0..20000 Digit/hour (degrees.tenths/hour if
temperature). (Default: 100.0)
112 SS.P e. Soft-Start Percentage
Output percentage during soft-start function.
0..100%. (Default: 50%)
113 SS. tH. Soft-Start Threshold
Threshold under which the soft-start percentage
function is activated, at starting.