Pixsys ATR144 - Page 69

User manual - ATR144- 69
-9999..30000 [digit
1 p. 86
] (degrees.tenths for
temperature sensors) (Default: 1000)
114 SS . ti . Soft-Start Time
Max. Softstart duration: if the processs will not reach the
threshold selected on par. SS. tH. within the selected
time, the controller starts to regulate on setpoint.
00:00 Disabled
00:01-24:00 hh:mm (Default: 00:15)
115 M A . ti . Maintenance Time
Maintenance time for pre-programmed cycle.
00:00-24:00 hh.mm (Default: 00:00)
116 FA . G r. Falling Gradient
Falling gradient for pre-programmed cycle.
0 Disabled (Default)
1..10000 Digit/hour
1 p. 86
(degrees.tenths/
hour if temperature)
117÷121 Reserved Parameters - Group H
Reserved parameters - Group H