Pixsys ATR144 - Page 79

User manual - ATR144- 79
188 a.tm.1 Action Timer 1
Selects the type of action performed by timer 1 when
connected to an alarm
Start Start. Active during timer counting (Default)
End End. Active at timer expiry
W A rn. Warning. Active 5” before the timer expiry
189 t m r. 2 Timer 2
Enables timer 2
diS a b. Disabled (Default)
En a b. Enabled
En.St A. Enabled and active at start
190 t.b. t.2 Time Base Timer 2
Selects the time base used by timer 2
m m.SS minutes.seconds (Default)
hh.M M hours.minutes
191 a.tm.2 Action Timer 2
Selects the type of action performed by timer 2 when
connected to an alarm
Start Start. Active during timer counting (Default)
End End. Active at timer expiry.
W A rn. Warning. Active 5” before the timer expiry.
192 tM r. s . Timers Sequence
Select the correlation between the two timers.
Sin G L. Singles. Timers work independently (Default)
S eQ u e. Sequential. When timer 1
expires, timer 2 starts.
LooP Loop. When a timer expires,
another one starts.
193÷197 Reserved Parameters - Group M
Reserved parameters - Group M