Pixsys ATR144 - GROUP M - ЕПГ - Timer

78 - ATR144 - User manual
175 re. to . Reception Timeout
Defines the maximum wait time (after sending a query
to the slave) before reception is canceled due to a
timeout.
When this happens, the lost packet counter will be
increased.
10..1000 ms. Default: 100 ms.
176 n u . Er. Number of Errors
Defines the maximum number of allowed subsequent
faults (reception timeouts, CRC errors ) before the slave
status is notified as offline.
Any successfull communication will reset the fault
counter for off-line management to zero.
Setting this parameter to 0 will prevent the error
notification
0..100. Default: 10.
177÷185 Reserved Parameters - Group L
Reserved parameters - Group L.
12.m GROUP M -
ti m r
- Timer
186 t m r.1 Timer 1
Enables timer 1
diS a b. Disabled (Default)
En a b. Enabled
En.St A. Enabled and active at start
187 t.b. t.1 Time Base Timer 1
Selects the time base used by timer 1
m m.SS minutes.seconds (Default)
hh.M M hours.minutes