User manual - ATR144- 77
169
VA r.2
Variable 2
Selects the variable 2 used by the ATR144 in master
mode.
dis a b.
Disabled (Default)
W. Pro.
Write Process
r. W .c.S E.
Read/write command setpoint
w.c.o u.p.
Write command output percentage
r. W . A1.s.
Read/Write Alarm 1 setpoint
W.co ns.
Write constant
170
V.2. a d .
Variable 2 Address
Sets the address used by the master to write/read V A R. 2
0..65535. Default: 1001.
171
L.L. v .2
Lower Limit Variable 2
Lower range limit used for rescaling variable 2
-9999..+30000 [digit
1 p. 86
] (degrees for temperature
sensors). Default: 0.
172
u.L.v.2
Upper Limit Variable 2
Upper range limit used for rescaling variable 2
-9999..+30000 [digit
1 p. 86
] (degrees for temperature
sensors). Default:0
173
co n.2
Constant 2
Sets the constant value that will be transmitted while
operating in master mode, if selected on V A R. 2 .
0..65535. Default: 0.
174
tr.de.
Transmission Delay
Defines the minimum delay introduced by the modbus
master protocol between the full data reception by the
slave and a new query.
0..200 ms. Default: 2 ms.
To Next Page
Loading...
