Pixsys DRR245 User Manual

32 - DRR245 - User manual
11 Enter Configuration parameters
For configuration parameters see: (Par. 12 pag. 33)
Press Display Do
1
| for 3 seconds
Display 1 shows
0.000
with
the 1st digit flashing, while
display 2 shows
PASS
.
2
c
or
d
Changes flashing digit and
move to the next one using
| key.
Enter pa sword:
1234
.
3
| to confirm
Display 1 shows the first
parameter and display 2
shows the value.
4
c
or
d
Slide up / down through
parameters.
5
|
c
or
d
Increase or decrease
displayed value by pressing
| and an arrow key.
Enter new data which will
be saved on releasing the
keys. To change another
parameter return to
point 4.
6
c d
simultaneously
End of configuration
parameter change.
The controller exits from
programming.
11.1 Loading default values
This procedure allows to restore factory settings of the instrument.
Press Display Do
1
| for 3 seconds
Display 1 visualizes
0.000
with 1st digit blinking, while
display 2 shows
PASS
.
2
c
or
d
Change blinking digit and move
to the next one with
| .
Enter password:
9999
.
3
| to confirm
Device loads default settings.
Turn off and restart the
instrument.

Pixsys DRR245 Specifications

General

Brand	Pixsys
Model	DRR245
Category	Controller
Language	English