• The mains socket must be easily accessible and must be able to be reached without moving the oven in any way.
• The electrical connection must be easily accessible, even after the oven has been installed.
• The distance between the oven and the socket must be such that it does not cause the power cable to stretch.
Furthermore, the cable itself must not be under the base of the oven.
• In order to prevent any risks, damaged power cables must be replaced by the technical support service or a qualified
technician.
Earthing
In compliance with current regulations, it is mandatory to connect the equipment to an equipotential system whose efficiency
must be correctly checked according to the regulations in force.
Connect the appliance via the specific terminal located at the back of the oven, with a cable that has a minimum cross-
section of 10 mm
2
.
The terminal bears the following symbol:
Stacked ovens
Ovens of the same model can be stacked on top of each other, without using a chimney connection.
Up to a maximum of 3 elements can be stacked: three single-chamber versions or a double-chamber plus single-chamber
combination.
For the second version, we recommend placing the double-chamber oven at the bottom and the single-chamber oven on top.
To Next Page
Loading...