PLANET ECLIPSE EMF100 - Frame Assembly; Feedneck and PAL Plunger

FIG-1
FIG-1
Long clamping feed screw
10-32 UNF x 5/8”
Feed swivel
Feed swivel o-ring
#006 NBR70
Short clamping feed screw
10-32 UNF x 1/2”
PAL
Feed tube
PAL Plunger
Feed lever
2
9
8
3
17
15
5
14
16
13
11
7
6
4
1
10
12
8
40 41
EMF100 EMF100
TECHNICAL
FRAME ASSEMBLY
FIG-1
1
Magazine well
2
Safety button
3
Three-way body pin
with 3x1 NBR70 o-ring
4
Magazine latch pivot pin
5
Magazine release catch
6
Magazine latch spring
7
EMF100 frame
8
POPS ASA retaining nuts
9
POPS ASA screws
10-32 UNF x 1” cap head socket
10
Trigger
11
Trigger spring
12
Trigger plate
13
Trigger plate retaining screws
14
Three-way assembly
15
Three-way push pin
16
Trigger pin
17
Push pin retainer
with 3x1 NBR70 o-ring
TECHNICAL
FEEDNECK AND PAL PLUNGER
FIG-1
The EMF100 PAL clamping feedneck incorporates our
Deftek system (patent pending), meaning the feedneck
is designed to be slightly oset to neutralise any
paintball bounce-back, providing the optimum paintball
feed system.