Command Guide
-149-
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos queue-policer queue 4 9999
4.2.65.100 qos queue-shaper queue
Command:
qos queue-shaper queue <Queue : 0~7> <Rate : 100-13200000>
qos Quality of Service
queue-shaper Queue shaper configuration
queue Specify queue
<Queue : 0~7> Specific queue or range
<Rate : 100-13200000> Policer rate in kbps
Default:
0
Usage Guide:
To configure Egress Queue Shapers Rate of QoS for specific interface
Example:
To configure Egress Queue (4) Shapers Rate (9999 Kbps) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos queue-shaper queue 4 9999
4.2.65.101 qos shaper
Command:
qos shaper <Rate : 100-13200000>
qos Quality of Service
shaper Shaper configuration
<Rate : 100-13200000> Shaper rate in kbps
Default:
0
Usage Guide:
To configure Egress Port Shapers Rate of QoS for specific interface
To Next Page
Loading...
Need help?
General