Planet IGSW-24040T - Exit; History Size

Command Guide
-226-
4.2.103.7 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# exit
Switch (config)#
4.2.103.8 history size
Command:
history size <0-32>
history Control the command history function
size Set history buffer size
<0-32> Number of history commands, 0 means disable
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# history size 1