Planet IGSW-24040T - Exit; Firmware; Firmware Swap

Command Guide
-335-
Example:
To configure Instance Command (below table) of Group (1)
Switch # erps 1 command force port0
4.12 exit
4.12.1 exit
Command:
exit
exit Exit from EXEC mode
Default:
None
Usage Guide:
To exit EXEC mode
Example:
To exit EXEC mode
Switch # disable
Switch > exit
Press ENTER to get started
4.13 firmware
4.13.1 firmware swap
Command:
firmware swap
firmware Firmware upgrade/swap
swap Swap between Active and Alternate firmware image