Planet IGSW-24040T - Motd-Banner

Command Guide
-228-
4.2.103.11 motd-banner
Command:
motd-banner
motd-banner Enable the display of the MOTD banner
Default:
Enabled
Usage Guide:
To enable MOTD banner.
Example:
To enable MOTD banner..
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# motd-banner
4.2.103.12 no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (motd-banner) for vty 1
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# no motd-banner