User’s Manual of IVS-H125 Series
56
Server Date
& Time:
Displays the date and time of the device
PC Time: Displays the date and time of the connected PC
Synchronize
with PC:
Click this option to enable time synchronization
with PC time
Manual setting: Click this option to set time and date manually
Adjust:
Synchronize
with NTP:
Click this option if you want to synchronize the
device’s date and time with those of time server
called NTP server (Network Time Protocol)
NTP server name: Type the host name or IP address or domain name of the NTP
server.
NTP sync. Interval: Select an interval between 1 and 23 hours at which you want to
adjust the device’s time referring to NTP server
Time zone: Set the time difference from Greenwich Mean Time in the area
where the device is installed.
Daylight saving: Check this item to enable daylight saving adjustment.
Daylight Saving
Start Time:
Sets up the date and time of daylight saving start time.
Daylight Saving
Stop Time:
Sets up the date and time of daylight saving stop time.
Daylight Saving
Offset:
Sets up the date of daylight saving offset.