Planet IVS-H125 User Manual

User’s Manual of IVS-H125 Series
57
6.3.3. Maintenance
Default Settings
(Include the network
setting):
Recall the device hard factory default settings. Note that click
this button will reset all device’s parameters to the factory
settings (including the IP address).
Default Settings
(Except the network
setting):
The unit is restarted and most current settings are reset to
factory default values. This action will not reset the network
setting.
Backup Setting: To take a backup of all of the parameters, click this button. If
necessary, it will then be possible to return to the previous
settings, if settings are changed and there is unexpected
behavior.
Restore Setting: Click the “Browse” button to locate the saved backup file and
then click the “Restore Setting” button. The settings will be
restored to the previous configuration.
Firmware upgrade: The device supports new firmware upgrade.
1. Close all other application programs which are not
necessary for firmware update.
2. Make sure that only you access this device at this moment

Planet IVS-H125 Specifications

General

Brand	Planet
Model	IVS-H125
Category	Server
Language	English