Planet SGSD-1022 - Tacacs-Server Port

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
433
Console(config)# tacacs-server 1 host 192.168.1.25
Console(config)#
tacacs-server port
This command specifies the TACACS+ server network port. Use the no form to restore the default.
Syntax
tacacs-server port port_number no tacacs-server port
port_number - TACACS+ server TCP port used for authentication messages. (Range: 1-65535)
Default Setting
49
Command Mode
Global Configuration
Example
Console(config)# tacacs-server port 181
Console(config)#
tacacs-server key
This command sets the TACACS+ encryption key. Use the no form to restore the default.
Syntax
tacacs-server key key_string no tacacs-server key
key_string - Encryption key used to authenticate logon access for the
client. Do not use blank spaces in the string.
(Maximum length: 48 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)# tacacs-server key green