Planet SGSD-1022 - Show Interfaces Counters

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
520
Command Usage
If no interface is specified, information on all interfaces is displayed. For a description of the items displayed by this
command, see “Displaying Connection Status”.
Example
Console# show interfaces status ethernet 1/5
Information of Eth 1/5
Basic Information:
Port Type: 100TX
Mac Address: 00-30-4F-10-22-A1
Configuration:
Name:
Port Admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full
Broadcast Storm: Enabled
Broadcast Storm Limit: scale:1000K level:5 octets/second
Flow Control: Disabled
LACP: Disabled
Port Security: Disabled
Max MAC Count: 0
Port Security Action: None
Current Status:
Link Status: Up
Port Operation Status: Up
Operation Speed-duplex: 100full
Flow Control Type: None
Console# show interfaces status vlan 1
Information of VLAN 1
MAC address: 00-30-4F-12-34-56
Console#
show interfaces counters
This command displays interface statistics.
Syntax
show interfaces counters [interface] interface
• ethernet unit/port
-unit - Stack unit. (Range: 1)
-port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
Default Setting