User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
563
bridge-ext gvrp
This command enables GVRP globally for the switch. Use the no form to disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
GVRP defines a way for switches to exchange VLAN information in order to register VLAN members on ports across the
network. This function should be enabled to permit automatic VLAN registration, and to support VLANs which extend
beyond the local switch.
Example
Console(config)#bridge-ext gvrp
Console(config)#
show bridge-ext
This command shows the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
See “Displaying Basic VLAN Information” on page 3-172 and “Displaying Bridge Extension Capabilities” on page 3-16 for
a description of the displayed items.
Example
Console# show bridge-ext
Max Support VLAN Numbers: 256
Max Support VLAN ID: 4094
Extended Multicast Filtering Services: No
Static Entry Individual Port: Yes
VLAN Learning: IVL
Configurable PVID Tagging: Yes
Local VLAN Capable: No
Traffic Classes: Enabled
To Next Page
Loading...
Need help?
General
