User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
354
session:
Console(config)# exit
Console#exit
Press ENTER to start session
User Access Verification
Username:
quit
This command exits the configuration program.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
Console# quit
Press ENTER to start session
User Access Verification
Username:
To Next Page
Loading...
Need help?
General
