Planet SGSD-1022 - Authorization Exec

User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
443
Example
Console(config)# aaa authorization exec default group tacacs+
Console(config)#
authorization exec
This command applies an authorization method to local console or Telnet connections. Use the no form to disable authorization
on the line.
Syntax
authorization exec {default | list-name} no authorization exec default - Specifies the default method list created with the
aaa authorization exec command (page 4-103).
list-name - Specifies a method list created with the aaa authorization exec command.
Default Setting
None
Command Mode
Line Configuration
Example
Console(config)#line console
Console(config-line)#authorization exec tps
Console(config-line)#exit
Console(config)#line vty
Console(config-line)#authorization exec default
Console(config-line)#
show accounting
This command displays the current accounting settings per function and per port.
Syntax
show accounting [commands [level] | [dot1x [statistics [username user-name | interface]] | exec [statistics] | statistics]
commands - Displays accounting information for CLI commands entered at the specified privilege level.
level -The CLI command privilege level. (Range: 0-15)
dot1x - Displays dot1x accounting information.