1) Access Point
Figure 4-14 Wireless Security - Access Point
¾
Operation Mode - Shows the current operation mode.
¾
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this AP without encryption. It is strongly
recommended that you choose one of the security types to enable security.
¾
WEP - Select 802.11 WEP security.
• Type - You can select one of following types.
1)
Automatic - Select Shared Key or Open System authentication type automatically
based on the wireless station's capability and request.
2)
Shared Key - Select 802.11 Shared Key authentication type.
3)
Open System - Select 802.11 Open System authentication.
29
To Next Page
Loading...
