¾
Max Tx Rate - Specifies the maximum transmit rate of the AP through this field.
¾
Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations
to access the AP.
¾
Enable SSID Broadcast - Select or deselect this check box to allow or deny the AP to
broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the local
area for wireless networks to associate with, they will detect the SSID broadcast by the AP.
¾
MAC of AP (1-4) - Enter the MAC address of other AP(s).
Click the Search button to detect the SSIDs in the local area.
)
Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.
4.5.2 Wireless Security
Selecting Wireless > Wireless Security will enable you to configure wireless security for your
wireless network to protect your data from intruders. The AP provides three security types: WEP,
WPA/WPA2 and WPA-PSK/WPA2-PSK. Wireless security can be set on the following screen
shown as Figure 4-14. The security options are different for different operation mode.
28
To Next Page
Loading...
Need help?
General
