• Default Password: admin
• Default IP Address: 192.168.1.1
• Default Subnet Mask: 255.255.255.0
)
Note:
Any settings you have saved will be lost when the default settings are restored.
4.7.5 Backup & Restore
Selecting System Tools > Backup & Restore allows you to save all configuration settings to your
local computer as a file or restore the AP's configuration on the screen shown in Figure 4-35.
Figure 4-35 Save or Restore the Configuration
Click Backup to save all configuration settings to your local computer as a file.
To restore the AP's configuration, follow these instructions:
• Click Browse… to find the configuration file which you want to restore.
• Click Restore to update the configuration with the file whose path is the one you have
input or selected in the blank.
)
Note:
1. The current configuration will be covered with the uploading configuration file.
2. Wrong process will lead the device unmanaged.
3. The restoring process lasts for 20 seconds and restart automatically. Do not power off the
device during the process to avoid any damage.
4.7.6 Ping Watch Dog
Selecting System Tools > Ping Watch Dog allows you to continuously monitor the particular
connection between the AP to a remote host. It makes this AP continuously ping a user defined IP
address (it can be the internet gateway for example). If it is unable to ping under the user defined
constraints, this device will automatically reboot.
53
To Next Page
Loading...
Need help?
General
