• Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
)
Note:
You will be reminded to reboot the device after clicking the Save button.
2) Multi-SSID
Figure 4-15 Wireless Security – Multi-SSID
¾
Operation Mode - Shows the current operation mode. You can choose one of the 4 SSID
from the pull-down list.
¾
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this AP without encryption. It is strongly
recommended that you choose one of the security types to enable security.
¾ WPA/WPA2 - Select WPA/WPA2 based on Radius Server.
• Version - You can select one of following versions.
1)
Automatic - Select WPA or WPA2 automatically based on the wireless station's
capability and request.
2)
WPA - Wi-Fi Protected Access.
31
To Next Page
Loading...
Need help?
General
