3)
WPA2 - WPA version 2.
• Encryption - You can select either Automatic, TKIP or AES.
• Radius Server IP - Enter the IP address of the Radius Server.
• Radius Port - Enter the port used by radius service.
• Radius Password - Enter the password for the Radius Server.
• Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.
)
Note:
This security option will become unavailable, if the Enable VLAN box in Figure 4-9 is checked.
¾ WPA-PSK/ WPA2-PSK - Select WPA based on pre-shared key.
• Version - You can select one of following versions.
1)
Automatic - Select WPA-PSK or WPA2-PSK automatically based on the wireless
station's capability and request.
2)
WPA-PSK - Pre-shared key of WPA.
3)
WPA2-PSK - Pre-shared key of WPA2.
• Encryption - When you select WPA-PSK or WPA2-PSK for Authentication Type, you
can select either Automatic, TKIP or AES as Encryption.
• PSK Passphrase - Enter a passphrase here.
• Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
)
Note:
You will be reminded to reboot the device after clicking the Save button.
32
To Next Page
Loading...
Need help?
General
