User Manual of WNAP-W2201A
-10-
2.1.2 Hardware Description
LED Definition
LED COLOR STATUS FUNCTION
Green
On
Device power on
Green
Flash
Detect and identify the LED (controlled by S/W)
PWR
Green
Off
Device power off (controlled by S/W)
Button definition
Object Description
Reset
Press the Reset button for over 5 seconds and then release it to restore system
to the factory default settings.
H/W Interface definition
Object Description
PoE Port
(802.3af/at PoE)
10/100bps RJ45 port, auto MDI/ MDI-X
Connect PoE port to the IEEE 802.3af/at PoE switch to power on the device.
LAN Port
10/100Mbps RJ45 port, auto MDI/ MDI-X
Connect this port to the network equipment.
RJ11 Port
Connect to the telephone through the 4-conductor RJ11 phone line
To Next Page
Loading...
