Planet WNAP-W2201A - NTP Settings; F 5-49 T Z S

User Manual of WNAP-W2201A
-65-
5.5.4 NTP Settings
This section assists you in setting the Wireless AP’s system time. You can either select to set the time and date
manually or automatically obtain the GMT time from Internet.
Choose menu “Management  NTP Settings” to configure the system time. You can also maintain the system
time by synchronizing with a public time server over the Internet. After the configuration, please click “OK” to
save the settings.
The configured time and date settings are lost when the wireless AP is powered off.
Figure 5-49 Time Zone Settings