Planet WNAP-W2201A - Quick Connection to a Wireless Network

User Manual of WNAP-W2201A
-75-
Chapter 6. Quick Connection to a Wireless Network
In the following sections, the default SSID of the WNAP-W2201A is configured to “default”.
6.1 Windows XP (Wireless Zero Configuration)
Step 1: Right-click on the wireless network icon displayed in the system tray
Figure 6-1 System Tray – Wireless Network Icon
Step 2: Select [View Available Wireless Networks]
Step 3: Highlight and select the wireless network (SSID) to connect
(1) Select SSID [default]
(2) Click the [Connect] button
Figure 6-2 Choosing a Wireless Network