User Manual of WNAP-W2201A
-71-
Figure 5-54 Save/Reload Settings
The page includes the following fields:
Object Description
Save Settings to File Click “Save…” to back up the configuration of the WNAP-W2201A and
then save the “config.dat” in your computer.
Load Settings from File Select the configuration file of the WNAP-W2201A and then click “Upload”
to reload the configuration back into the WNAP-W2201A.
Reset Settings to
Default
Click “Reset” to reset all settings of the WNAP-W2201A to factory default.
Factory Default Settings:
User Name: admin
Password: admin
IP Address: 192.168.1.253
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
DHCP: Client
SSID: PLANET_XXXX (“X” means the last 4 digits of the MAC address)
Wireless Security: None
To activate your settings, you need to reboot the wireless AP after you reset it.
To Next Page
Loading...
