User Manual of WNAP-W2201A
-46-
5.4.3 RF Output Power
Choose menu “WLAN2 (2.4GHz) RF Output Power” to adjust to different levels of transmitting power for the
wireless network according to various environment on this page. After the configuration, please click “Apply
Changes” to save the settings.
Figure 5-30 RF Output Power
RF Output Power Control provides the flexibility to control the Wi-Fi Transmit power to optimize the wireless
range. Wi-Fi power consumption for an Access Point could be reduced to up to 75% from its peak power
consumption for serving small to medium size homes, while maximum power is boosted for large homes and
businesses. The WNAP-W2201A supports output power control levels up to 5. You can change the RF output
power level here in accordance with various environments and signal strength.
To Next Page
Loading...
