User Manual of WNAP-W2201A
-22-
Time Zone Select
Select the Time Zone from the drop-down menu.
NTP Server
Select the NTP Server from the drop-down menu.
Enable NTP Client Update
Check this box to connect NTP Server and synchronize internet time.
Step 3. Wireless Basic Settings
Figure 5-8 Wizard – Wireless Basic Settings
The page includes the following fields:
Object Description
Band
Supports 802.11b, 802.11g, 802.11n and mixed mode. Please choose its
band according to your clients.
Mode
Supports AP, Client, WDS and AP+WDS mode.
SSID
Service Set Identifier identifies your wireless network.
Channel Width
Select 40MHz if you use 802.11n, otherwise, 20MHz is for the 802.11b/g
mode.
Control Sideband
It is only valid when you choose a 40MHz channel width.
Channel Number
Indicates the channel setting for the AP.
Step 4. Wireless Security Settings
Secure your wireless network by turning on the WPA or WEP security feature on the router. For this section, you
can set WEP and WPA-PSK security mode.
To Next Page
Loading...
