Planet WNAP-W2201A - Access Control; F 5-32 W a C

User Manual of WNAP-W2201A
-49-
5.4.5 Access Control
Choose menu “WLAN  Access Control” to allow or deny the computer of specified MAC address to connect
with the WNAP-W2201A on this page. After the configuration, please click “Apply Changes” to save the
settings.
Figure 5-32 Wireless Access Control
The page includes the following fields:
Object Description
Wireless Access
Control Mode
You can choose to set the Allow Listed, Deny Listed, or Disable this function.
MAC Address
Enter the MAC address you want to allow or deny connection to the
WNAP-W2201A in the field.
Comment
You can make some comment on each MAC address on the list.
Current Access Control
List
You can select some MAC addresses and click “Delete Selected” to delete it.
 Wireless Access Control example:
To deny a PC at the MAC address of 00:30:4F:00:00:01 to connect to your wireless network, do as follows:
Step 1. Select “Deny Listed” from MAC Address Filter drop-down menu.
Step 2. Enter 00:30:4F:00:00:01 in the MAC address box and click “Add”.