User’s Manual of WNRT-617
-95-
Figure 5-64
5.12 Advanced Routing
There are two submenus under the Advanced Routing menu as shown in Figure 5-38: Static Routing
List, System Routing Table. Click any of them, and you will be able to configure the corresponding
function.
Figure 5-49 Advanced Routing
5.12.1 Static Routing List
Choose menu “Static Routing List”, you can configure the static route in the next screen (shown in
Figure 5-50). A static route is a pre-determined path that network information must travel to reach a
specific host or network.
Figure 5-50 Static Routing
To Next Page
