User’s Manual of WNRT-617
-124-
Some laptops are equipped with an “Wireless ON/OFF” switch for the internal
wireless LAN, make sure the hardware wireless switch is switch to “ON” position.
6.2 Windows 7 (WLAN AutoConfig)
WLAN AutoConfig service is built-in in Windows 7 that can be used to detect and connect to wireless
network. This built-in wireless network connection tool is similar to wireless zero configuration tool in
Windows XP.
Step 1: Right-Click on the network icon displayed in the system tray
Figure 6-5
Step 2: Highlight and select the wireless network (SSID) to connect
(1) Select SSID [PLANET_WNRT-617]
(2) Click the [Connect] button
Figure 6-6
To Next Page
