E-13
COPY
DensityDensity
REPEAT
POWER
Press the + button or the - button and
select the number of copies.
• When the power is switched on, one copy is selected.
•A maximum of 20 copies can be set and the number of
copies is displayed in the display window.
• Each press of the + button increases the number of cop-
ies (by one) and each press of the - button decreases the
number of copies. Press and hold the button to switch
continuously.
Press the COPY button to print.
• The reading operation is performed for a one-sheet por-
tion (while the sheet is scrolled) and printing starts after
the scrolling completes.
Note
•A press of the FEED/STOP button during the reading operation
will cause the printing to stop and will result in a partial print.
To move the sheet surface, please press the FEED/STOP button
after the scrolling has stopped.
• When a CompactFlash card has been inserted, a press of the
MEMORY button during printing will start the memory storage
operation after printing is completed. (See Page E-15.)
• The one-screen portion is reduced to A4 paper size and printed.
In the wide type (M-10W) copyboard, the screen will be reduced
to about 71% in the horizontal direction.
When the copyboard is not going to be
used, press the POWER button and switch
off the power.
• Switch off the printer power.
Note
• In the absence of button operations, the fluorescent lamp will be
switched off after 30 minutes. Another press of the COPY button
will start the copy operation after the fluorescent lamp is switched
on.
Selecting the printing density
Select this when the density of the print is light.
Press the Density button and select darker
or standard.
Making additional copies
This will print the copy of the sheet that was
scrolled previously one more time.
Press the REPEAT button.
This starts the printing of the image data that has
accumulated in internal memory.
Note
• The sheet is not scrolled when additional copies are
made.
• The number of copies can be changed. To do so, make
the change before pressing the REPEAT button.
• In repeat printing, the color/black & white and density
settings will be the same as those of the prior printing.
• When printing or memory storage has not been per-
formed since switching on the power, image data will
not have accumulated in the internal memory and this
operation will not be possible.
Density indicator
Lit ..... Darker
Unlit .. Standard
To Next Page
Loading...
