E-7
PACKAGE CONTENTS
The package contents are as described below. Please check before use.
Copyboard, main unit ......... 1
See “Assembly and Setup Manual” for information about the assembly parts of the copyboard.
Printer* ......... 1
Please see the instruction manual of the printer for information about the printer accessories.
Stand* ........... 1
*The printer and stand may be sold separately.
■ Copyboard Accessories
• Special markers
(One each of black, red, blue, and green)
Use these markers to draw on the sheet surface.
• Special eraser (1)
Use this to erase the drawing.
• Power cable (4 m)
This cable supplies power to the copyboard.
• Printer tray (1 set)
The printer is placed on this tray.
(The set includes one printer tray, left and right brackets, six M3
assembly screws, four M4 screws, and three cable clips.)
•Wall mount brackets (1 set)
These fittings are used to mount the copyboard on a wall.
(The set includes four copyboard brackets and 16 M4 mounting
screws.)
• USB cable (1 m)
This cable is used to connect the dedicated printer with the printer
output connector of the copyboard.
Documents
• User’s manual
Includes information about safety precautions and the use of the
copyboard.
• Assembly and Setup Manual
Information covers the setup of the copyboard and the connec-
tions with the printer.
• Cushions (2 pcs.)
These cushions are used to absorb the shake of
printer tray in case wall mounting.
To Next Page
Loading...
