What to do if pressing the Print button on Plus M-11 does not result in printing?
If pressing the Print button does not initiate printing, verify that the printer's power and cable are securely connected. Also, ensure the printer's power indicator is lit and that neither the copyboard nor the printer displays any error indicators. If the copyboard's error indicator is flashing, consult Page E-30.
What to do if the copy is soiled on Plus M-11?
If the copy is soiled due to marker residue on the sheet, dampen a soft cloth with water, wring it out, and gently wipe the sheet in a stroking motion.
What to do if the Plus M-11 and PC are connected, but the PC does not recognize the copyboard?
First, ensure the copyboard is in operable condition and that the USB cable is properly connected. If the copyboard is connected to the PC via a USB hub, connect it directly to the PC's USB port instead.
Why is the ruled line of the sheet appearing on the print or in the file of the USB memory of Plus M-11?
If the ruled line appears on the print or in the USB memory file, or if black ink mixes into other colors in Color Mode, check the density indicator. If the setting is darker, select standard density.
What to do if the Plus M-11 and PC are connected, the supplied utility program does not operate after installation of the USB driver?
If the utility program doesn't operate after installing the USB driver, check if the USB driver from the CD-ROM has been properly registered in the device manager. If it hasn't, delete the USB driver and reinstall it.
Why is an altered color printed instead of the specified color on Plus M-11?
If an altered color is printed instead of the specified color, replace the print cartridges with new ones.
What to do if writing on the sheet of Plus Interactive whiteboard is not erased with the eraser?
If writing isn't erasing with the eraser, determine whether a marker other than a special marker was used. If so, moisten a cloth with water or neutral detergent, wring it out well, and wipe the area carefully.
What to do if portions of writing or lines are not printed or stored in memory on Plus Interactive whiteboard?
If portions of blurred characters or thin lines are not being printed or stored in USB memory, change the Density setting to “Dark”.
Why is there no printing on Plus M-11?
If there is no printing, check that the print cartridge is properly set and is not plugged.
How to switch on Plus M-11 Interactive whiteboard if pressing the ON/Standby button does not switch on the power?
If pressing the ON/Standby button doesn't switch on the power, check whether the cable of the AC power adapter is disconnected from the DC connector of the copyboard or the wall outlet.
Covers critical warnings about unit operation and potential hazards.
Guidelines for safe handling and connection of the AC power adapter.
Advice on preventing unit tipping and general cautions during use.
Identifies DC input, PC USB, and printer connectors on the rear panel.
Detailed explanation of each button, lamp, and display on the control panel.
Guide to printing scanned content and saving it to USB memory.
Step-by-step guide for basic printing, including preparation and execution.
Step-by-step guide for saving scanned images to a USB memory device.
Instructions for transferring image files from USB memory to a PC.
Procedure for deleting image files and folders from the USB memory device.
Guide to connecting and setting up the printer with the copyboard.
Install software required for capturing images directly from the copyboard.
Solutions for common issues related to the copyboard's operation.
Solutions for common issues encountered with the connected printer.
General| Brand | Plus |
|---|---|
| Model | M-11 |
| Category | Interactive whiteboard |
| Language | English |
To Next Page