Plus M-11 - Printer Operation Guide; Printer Setup and Connection

E-23
A printer is used to print the content of what has been drawn on the sheet surface.
Depending on the printer, the operation may differ and the names of the parts may be different. Please see your
printer instruction manual for details.
Printer Set Up
Please check that the copyboard and the printer have been connected. See Page E-33.
Set the paper.
Please use A4 or letter size printer paper.
See your printer instruction manual for details.
1) Arrange the paper edges so that they are even.
2) Insert paper at the specified position of the paper tray.
3) Press the paper guide gently until it touches the paper.
Switch on the power.
Press the power switch. The power indicator will light.
This completes the preparation of the printer.
A press of the Print button on the copyboard operation panel will
read the sheet surface portion and start the printing operation.
Notice
• Depending on the printer, the display indicators may flash from the
time the power is switched on until printing preparation is complet-
ed. When this happens, refer to the printer owner's manual, check
that preparation has been completed, and then start the copyboard
printing operation.
When finished printing...
Switch off the printer power and remove the paper.
Close the paper tray.
Notice
Caution: Do not switch off the printer power while printing.
Printer Operation Guide
Power switch
Paper tray
Paper guide
Paper
* The printer is an option.
Precautions in the use of printer paper
Please observe the following matters to avoid paper feed problems and paper jamming.
• Please do not use thin paper, thick paper, or handmade paper.
• Do not use paper that has protrusions, recesses, or burrs.
• Do not use paper that is folded, wrinkled, torn, or has cuts in it.
• Do not use embossed paper, paper with a rough surface, or coated paper.
• Do not use paper bearing cellophane tape, seals, or other material.
• Do not print on paper that has already been printed.
• Do not insert paper of differing paper sizes.
Paper guide
Appearance of printer is for
illustration purposes.