3
SAFETY AND HANDLING
This chapter contains important information on the safety, handling, and use of your
Classic
PH Series Proportioner.
Before installing the PH Series Proportioner and start-up,
carefully read all the technical and safety documentation
included in this manual. Pay special attention to the
information in order to know and understand the operation and
the conditions of use of the PH Series Proportioner. All of the
information is aimed at improving user safety and avoiding
possible breakdowns from the incorrect use of the PH Series
Proportioner.
WARNING! Presents information to alert of a situation that
might cause serious injuries if the instructions are not
followed.
CAUTION! Presents information that indicates how to avoid damage
to the equipment or how to avoid a situation that could cause minor
injuries.
NOTE! Is relevant information of a procedure being carried out.
Careful study of this manual will enable the operator to know the characteristics of the PH
Series Proportioner and the operating procedures. By following the instructions and
recommendations contained herein, you will reduce the potential risk of accidents in the
installation, use or maintenance of the PH Series Proportioner; you will provide a better
opportunity for incident-free operation for a longer time, greater output and the possibility of
detecting and resolving problems quickly and simply.
Keep this Operations Manual for future consultation of useful information at all times. If you lose
this manual, ask for a new copy from your PMC Distributor or go online and visit our web site at
www.polymac-usa.com.
The
Classic
PH Series Proportioner has been designed and built for the application of
polyurea chemical systems, polyurethane foam chemical systems, and some two-component
epoxy systems.
To Next Page
Loading...
