8.38
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
16.Apply a thin layer of float fluid to the threads, nut, or
BOC post (if applicable) and torque to specification.
TORQUE
Piston Nut: 22 lb-ft (30 Nm)
17.If applicable, install BOC post valving.
NOTICE
Ensure retaining ring is fully installed and secure.
18.If applicable, install BOC piston and retaining ring.
19.Apply Loctite® primer to the body cap threads.
20.Install appropriate O-ring and apply a thin layer of
shock oil to the O-ring ONLY.
STEERING / SUSPENSION
To Next Page
Loading...
