10
9929375 R02 - 2016-2019 GENERAL / GENERAL 4 Service Manual
© Copyright Polaris Industries Inc.
10.65
5. While holding the door handle in the full open
position, turn the adjuster until the door latch opens.
6. Mark the adjuster with a paint pen.
7. Turn the adjuster an additional 3–4 turns.
NOTICE
The door handle should be about 3/4 of the way
through its throw when it releases the latch.
8. Reinstall the door panel and fasteners.
AUDIO SYSTEM INSTALLATION
SERVICE VIDEO
A service video has been created
to help highlight this procedure.
To view the video, either:
• Scan the QR Code with a
mobile device
• From a computer, right click
HERE and open link in a new
window.
1. Route the ROPS audio harness down the RH ROPS
from behind front support ROPS down to frame
mounting point. Connect ROPS audio harness to
dash audio harness, matching wire colors. Install
rubber grommet in RH ROPS routing hole.
2. Install nut clips on underside of front support ROPS
mounting points.
BODY / FRAME
To Next Page
Loading...
Need help?
General
