Polaris Ranger 500 2x4 2007 - Fuel Pump; Replacement

4.17
CARBURETION SYSTEM
4
FUEL PUMP
Replacement
1. Remove the seat.
2. Disconnect the fuel pump wiring harness (A).
3. Remove the fuel line clamps and remove the fuel lines from
each side of the fuel pump (B).
4. Remove two screws that secure the fuel pump (B) to the
main floor.
5. To install the fuel pump (B), repeat Step 1 through Step 4
in reverse order.
CAUTION
Be careful not to damage fuel pump.
Passenger Side
B
A