9.20
BRAKES
3. Turn adjuster screw back in finger tight using a hex wrench.
4. Slowly pump the brake pedal until pressure has been built
up. Maintain at least 1/2"(12.7 mm) of brake fluid in the
reservoir to prevent air from entering the master cylinder.
REAR CALIPER
Rear Caliper Exploded View
Rear Brake Caliper Mounting Bolt:
Torque 18 ft. lbs. (24 Nm)
Pump the Brake Pedal
Bleeder Screw
30-60 IN. LBS.
(4-6.5 NM)
Adjuster Screw
(Finger Tight)
Caliper Body
Piston
Caliper Mount
Pads
Dust Boots
Square
O-rings
DURING ASSEMBLY
To Next Page
Loading...
