7.7
FINAL DRIVE
7
10. Install brake caliper using new bolts. Tighten bolts to
specified torque.
11. Install wheel, washers, wheel nuts, and tighten evenly in a
cross pattern to specified torque.
Refer to “Torque Specifications” on Page 7.2
Exploded View (4X4)
Brake Caliper Bolt Torque
18 ft. lbs. (24 Nm)
18 ft. lbs.
(24 Nm)
CAUTION
New bolts have a pre-applied locking agent
which is destroyed upon removal. Always use
new brake caliper mounting bolts
upon assembly.
Flange Nuts:
Flat side against wheel
18 ft. lbs. (24 Nm)
Use new bolts with
pre-applied
locking agent.
Disc Brake
Stud
Front Hub
Rim
Tire
Wheel Nut
Dust Cover
Cotter Pin
Washer
Slotted Nut
70 ft. lbs. (95 Nm)
(Spec on page 7.2)
To Next Page
Loading...
