3.9
ENGINE
3
9. Disconnect exhaust from the engine.
10. Remove airbox.
11. Remove oil and coolant lines.
NOTE: Drain and dispose of the fluids properly.
12. Remove all engine mount nuts and / or engine mount plates.
Carb Model shown below.
13. Carefully remove engine through top of seat frame. Lift the
engine from bottom mounts and then lift the engine from
rear mounts.
NOTE: Use caution when lifting the engine out of
frame. Use an engine lift or other means, if the
engine appears too heavy to be lifted manually.
Top / Rear Engine
Mount
Carb
Top Motor
Mounts
Rear
Motor
Bottom Mount
Mount
To Next Page
Loading...
