Polaris RANGER 570 2020

8
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
© Copyright Polaris Inc.
8.27
17.Remove the snap ring retaining the input shaft
assembly.
18.Remove the input shaft assembly. Inspect the pinion
gear
g
for chipped, broken, or missing teeth. Inspect
the input shaft bearing
h
for signs of wear. Replace
the input shaft cover O-ring prior to reassembly.
19.Inspect the input shaft bushing
j
for wear.
20.Thoroughly clean the gearcase components before
beginning reassembly.
FINAL DRIVE